"Urambo Tauro" (urambotauro)
08/26/2017 at 12:00 • Filed to: junkyard, salvage yard, parts, murlequin, wrenching
3
5|
"Urambo Tauro" (urambotauro)
08/26/2017 at 12:00 • Filed to: junkyard, salvage yard, parts, murlequin, wrenching | 3
| 5 |
Time to find some parts for the ol’ ’Murlequin.
After fixing that !!!error: Indecipherable SUB-paragraph formatting!!! issue, I decided to finally focus on resolving something that I’ve been putting up with for far too long. The headlamps. Specifically, the one on the right side.
Left side headlamp, for comparison
A previous owner had rendered the up/down tilt adjustment useless by welding a bolt to the headlamp bucket where the top adjuster used to be. Because of this, my right headlamp wast casting its beam on the ground, about 30 feet in front of the truck. I guess that’s better than shining it in other drivers’ mirrors...
But I’d had enough of that. After all, how hard could it be to find parts for a mid-’90s GM truck? All I needed to get was an adjuster to replace the bolt, and a new headlamp “bucket”, since the top ear for the adjuster screw was all screwed up.
Surprisingly, I had no luck at my local parts store, neither through their computer system, nor the old parts book. They could get parts for the fancier composite headlamp style trucks, but I was SOL with my sealed beams. I guess that’s another reason why so many owners of sealed-beam trucks swap over to the composite front ends.
So I started looking online, starting with good ol’ RockAuto. Sure enough, they had exactly what I was looking for. The headlamp bucket (a stamped steel “cup” that holds the sealed-beam bulb) and a new trim ring could be mine for the low low price of... $49.99.
Excuse me?
So I took the part number and punched it into Google, only to find similar pricing at Amazon and other retailers. Was I completely out of my reckoning on what an appropriate price is for these? I was expecting, Oh I dunno, something like $10 or $20. After all, my descent into the rabbit-hole of reverse-lookups and OEM part numbers revealed that this is the very same assembly used in all kinds of GM vehicles back in the day, from trucks and vans to Monte Carlos and Corvettes.
So I decided to start checking salvage yards. I found one that, according to !!!error: Indecipherable SUB-paragraph formatting!!! , had a couple of full headlamp assemblies in stock, on an Express van. So I went to go check it out.
I saw this nice C2 on the way there.
Once at the salvage yard, I started a-trekkin’ through the lot. Not the best lot, I gotta admit. None of the cars are perched atop old wheels for easy wrenching. Nor was there nice level gravel underneath. Just a field with muddy paths and weeds growing between the cars that had been there the longest. At least everything was organized by manufacturer.
Remind me not to come here on rainy days.
Not a great place for undercarriage parts, what with everything sitting on the ground. Especially in Michigan lol. They did, however, pull a bunch of axles out, setting them aside for easy access:
Before long, I saw the van:
Oh hai Lumina. Don’t see many of you anymore.
Alas, the buckets were rusted and the top ears had been bent, presumably in a collision. Welp, time to go check out the truck section.
Found one!
I soon found this ’93, peeked through the slots and saw an intact bucket. Yes! Good adjusters, too.
Mine.
Since I’m here, do I need anything under the hood? Nope.
Since I’m here, do I need anything from inside? Nope.
Making my way back through the yard, here’s some more stuff that they had there:
Dustbuster!
Nice wheel spacers.
So much rust
One Mustang? That’s it? Well, I don’t think I’m gonna need any parts off of that one.
LeMans!
You want T-tops?
Back at the counter, they wanted $5 for the headlamp assembly. Now that’s more like it! I paid them and made my way home.
LEFT: my old assembly RIGHT: junkyard replacement
The bolt twisted away from the old bucket with little effort. As expected, there wasn’t much of the bucket’s ear left. I cleaned up the “new” adjuster and installed the headlamp. It sure is nice not to have to remove an entire bumper cover to do this.
Ta-da! I’ll be sure to adjust these after it gets dark.
lone_liberal
> Urambo Tauro
08/25/2017 at 17:35 |
|
Nice hunting! The resto parts places wanted something like $15 each for simple headlight retaining rings that were uses on a ton of GM cars so I did the same as you, hit the yard. $3 for a pair.
NojustNo
> Urambo Tauro
08/25/2017 at 17:43 |
|
I love u-pull junk yards. Always cheap stuff, but you dont know until you get there the condition or availability of the part you need. Great resource for oddball parts that nobody sells too. i needed the plastic cover on the b pillar of my 87 camry and the shroud around the ignition key from a previous break-in attempt and couldn’t find either anywhere but the local Pick-N-Pull. They had like 5 87-91 Camrys to browse from.
Want:
The white El camino i saw buried next to the trees.
Question: That silver miata looked straight. Was it hit on the other side?
|
Urambo Tauro
> NojustNo
08/25/2017 at 18:30 |
|
Not sure. There were yellow jackets buzzing around, so I tried to keep my wandering in the weeds to a minimum.
|
Urambo Tauro
> lone_liberal
08/25/2017 at 18:34 |
|
Nice! Yeah, those lamps used to be so ubiquitous. It’s shocking to see such a high price on them. I thought they’d be a dime a dozen.
Schaefft
> Urambo Tauro
08/26/2017 at 18:58 |
|
Someone save the Buick Riviera and Olds Silhouette!